When installing the GFD Dual-Fuel System™ there are several options. Depending on the model that you purchase you may choose from the following:

Do-It-Yourself
TGI recommends that a trained diesel mechanic, in conjunction with TGI technical support or training, install your system. The length of time to install a system will depend upon the system purchased. The average installation time is approximately 2 to 8 hours.

TGI Inc. supplies virtually every component needed for a complete installation. The only additional parts that you will need to complete the installation are a gas pressure regulator @ 1 to 15 PSI and a gas line to run to the GFD. The only tools needed to install the GFD Dual-Fuel System™ are common hand tools and a drill. The electronic model may require some welding and a one-inch hole saw.

TGI Inc. has designed the GFD Dual-Fuel System™ to bolt securely and easily to any diesel engine configuration, however, the system can be installed elsewhere for convenience.

On-Site Installation
TGI Inc. also offers the option of having a representative install the unit at your location. Phone support is available at anytime once the system has been installed should there be any additional questions.